HUGO Human Body Model
The CST STUDIO SUITE™ product family allows to import arbitrary voxel data sets. The most prominent and most often used one is the anatomical data set of the Visible Human Project® . The so-called Voxel Man is based on a dissected male corpse sliced into several thousand layers.
Figure 1: Human Body Interface - different tissues and different resolutions.
The import is performed via an interface that allows different resolutions (1mm to 8mm) and different material tissues to be chosen. The area of interest can be selected a priori in a side view and front view.
Figure 2: Direct access to the material properties via navigation tree in CST STUDIO 2006.
Once the model has been imported into the CST STUDIO SUITE 2006™ the materials are accessible via the navigation tree. Multiple selection of materials and re-assigning e.g. parameterised frequency dependant properties can be done.
CST Article "HUGO Human Body Model"
last modified 9. Nov 2005 9:57
printed 10. Feb 2012 5:34, Article ID 165
URL:
All rights reserved.
Without prior written permission of CST, no part of this publication may be
reproduced by any method, be stored or transferred into an electronic data processing system, neither mechanical or by any other method.
Article ID: 165
Last modified: 9. Nov 2005 9:57
Other Articles
This article concerns the design of a X-Band squintless horn antenna array consisting out of 96 radiating elements. The full design of the 2.4m antenna blank (including the simultaneous excitation of all 96 arms) has been performed within CST MICROWAVE STUDIO®. The simulated results have been in an excellent agreement with compact range measurements.
Read full article..
This article examines the modelling of lightning strikes using CST MICROWAVE STUDIO® (CST MWS). The surface current distribution due to a double-exponential form lightning strike on the nose of an airplane is calculated by way of example.
Read full article..
In this presentation CST MICROWAE STUDIO was used for plasma uniformity prediction through the E/H-field and power loss distribution. The plasma source S-parameter are analysed and the impedance-matching-network for different antenna is designed. Finally a high-frequency & large-area plasma source is analysed.
Dr. Hyun-su Jun, KAIST, Low-temperature plasma lab. Presentation on the Korean CST User Group Meeting 2009.
Read full article..
CST EM STUDIO® is used to calculate the cogging torque in a 4-pole Surface Permanent Magnet Motor (PMSM). For such a calculation a parametric sweep is performed to determine the torque on the rotor at angular intervals. Only the permanent magnets are required in the model. The stator winding excitation is not necessary for this calculation and is hence omitted in this model.
Read full article..
The article describes the RCS and farfield simulation of a large airplane at a frequency of 4GHz. The simulation is performed with the new Integral Equation solver of CST MICROWAVE STUDIO®. The length and width of the airplane is about 27 meters, and the total height is about 8 meters. The excitation is done by a plane wave from the front. In total, the calculation for the airplane is approximately 350 wavelengths in size. We perform a monostatic RCS calculation and we show the farfield and surface current distributions for the airplane.
Read full article..