This conference offers an excellent opportunity for engineers and scientists from industry, research and universities working on automotive applications to meet. CST will present current technology and the newest developments in EM simulation, together with application examples relevant to the field. Experts from Audi, TE Connectivity and Dassault Systèmes will give keynote speeches about their work and future trends, and CST customers working across the automotive supply chain will present their work in parallel sessions.
The conference will be held at Audi Forum Neckarsulm. A look behind the scenes of modern automobile production on a tour of the Audi plant is a highlight for visitors to the impressive Neckarsulm campus.
|Start – End||Room & Presenter|
|08:30 – 09:15||Reception Area: Registration & Welcome Coffee|
|Room 1 / Plenum|
|09:15 – 09:15||Welcome & Introduction - EM Simulation in the Automotive Industry
|09:30 – 10:00||KEYNOTE: Using EM Simulation for the Development of Connected Cars
Dr. Lars Reichardt, Audi AG
|10:00 – 10:30||KEYNOTE: Simulation for Innovation - Connecting the Dots Ralf Kakerow, TE Connectivity|
|10:30 – 11:00||KEYNOTE: Virtual Test Environment to Accelerate Electric Vehicle, Driving Automation and Mobility Services Innovations Xavier Silhouette, Dassault Systèmes|
|11:00 – 11:20||Break|
|Room 1: Electrical & Electronic Components||Room 2: ADAS & Autonomous Driving||Room 3: Electric Vehicles|
|11:20 – 11:45||New High Speed Design Simulation Challenges in Automated Vehicles Stefanie Schatt, Continental Automotive GmbH||Optimization of Radar Sensors Positioning behind Fascias and Radoms Dr. Niels Koch, Audi AG||Simulation of Wireless Power Transfer Systems for Electric Vehicle Charging Dr. Christian Kremers, CST GmbH|
|11:45 – 12:10||Signal Integrity and Radiated Emission of Flexible PCBs Dr. Leonardo Sassi, CST GmbH||Estimation of Radar Sensor Performance Based on Co-Simulations Dr. Johannes Meyer, Robert Bosch GmbH||Analysis, Optimization and Verification of a High Voltage Connector Dr. Thomas Gneiting, AdMOS GmbH|
|12:10 – 12:35||EM Simulation of IMSE Smart Surfaces Anne Isohätälä, Tacto Tek||Multiscale Simulation for Automotive Radar Dr. Marc Rütschlin, CST GmbH||AllCharge - EMC Simulation during the Product Development Process Felix Müller, Continental Automotive GmbH|
|12:35 – 13:00||Wire Harness EM Simulation Dr. Ulrich Becker, CST GmbH||Metallized Plastic Antenna Radar System César Domínguez, Huber+Suhner AG||Vibro-Acoustic Simulation of Electric Powertrain Thomas Liebernickel, Dassault Systèmes Deutschland GmbH|
|13:00 – 14:00||Lunch|
|Room 1 : Electromagnetic Compatibility||Room 2: Connected Vehicles||Room 3: Integrated Solutions|
|14:00 – 14:25||Electromagnetic and Circuit Simulation of Bulk Current Injection in Automotive Test Setups Involving Complex Wiring Harness Prof. Flavia Grassi, Politecnico Milano||From pure automotive antenna evaluation to real and virtual drive testing Thomas Lankes, Kathrein Automotive GmbH||Antenna Integration Technologies for 5G car-application Dr. Andy Heinig, Fraunhofer EAS/IIS|
|14:25 – 14:50||BCI Modeling and Application to Sensor Immunity Jan Benz, Robert Bosch GmbH||Antenna Design and Placement on Vehicles Dr. Susanne Hipp, CST GmbH||Novel High-Efficiency mmWave Antenna Elements for 5G V2X, V2V and In-Cabin Communication Muhammad Imtiaz, IMS Connector Systems GmbH|
|14:50 – 15:15||EMC Simulation of Automotive Ethernet Dr. Andreas Barchanski, CST GmbH||Multiple Antenna Reference Design for Next Generation Connected Vehicles Dr. Vladimir Furlan, Taoglas GmbH||Lower Cost Transmit RF Frontends for Connected Car Applications and Advanced Driver-Assistant Systems Gareth Lloyd, ROHDE & SCHWARZ GmbH|
|15:15 – 15:45||Coffee Break|
|Room 1 / Plenum|
|15:45 – 16:10||Democratization of EM Simulation Using the Example of Full Vehicle Analysis Dr. Johannes Hippeli, BMW AG|
|16:10 – 17:00||Panel Discussion: Is Simulation Cooperation Between Suppliers And OEMS Needed? Panelists: Dr. Lars Reichardt, Audi AG | Dr. Johannes Hippeli, BMW AG | Dr. Jan Hansen, Robert Bosch GmbH | Bernd Trageser, Continental Automotive GmbH | Ralf Kakerow, TE Connectivity
Moderator: Dr. Matthias Tröscher, CST GmbH
|17:00||End of Conference|
Throughout the day CST support staff will be available in the reception area to answer any questions you may have. If you are not yet familiar with CST STUDIO SUITE tools, they can provide you with an introduction.
Please contact us if you would like to receive more information about sponsoring this event.