Since the first release of CST MICROWAVE STUDIO®, developing techniques for microwave and RF simulation has been a cornerstone of CST’s work, and the integration of tools such as Antenna Magus and Filter Designer 3D and 2D into the simulation workflow further widens CST’s MW&RF capabilities. The CST® Webinar Series 2017 will demonstrate how EM simulation can be applied to some of the latest, most active fields of microwave engineering, and will also demonstrate how simulation and measurement can be combined to characterize the RF properties of materials.
The design and analysis of filters can be challenging and simulation can play a vital part of the development process. In this webinar, we will give an overview of the different filter design capabilities of CST STUDIO SUITE, including tools for synthesis and tuning, as well as multiphysics simulation for power handling analysis.September 14, 2017 | 5 pm CET To the Webinar
This webinar will talk about the simulation techniques and tools that allow new antenna concepts for Internet of Things devices to be developed and tested quickly at a very early design stage, leading to a better connected device and a reduced overall device design time.November 21, 2017 | 5 pm CETTo the Webinar
This webinar will show how CST STUDIO SUITE can be used to perform and study all of the design stages of automotive radars, starting from the basic element which is the antenna, passing by its integration inside a radome before actually placing and calibrating the whole package inside the car.October 26, 2017 | 5 pm CETTo the Webinar
For cubesats, antenna size and weight is a critical factor for RF performance, structural considerations, aerodynamic and thermal performance. This webinar reviews modern trends of antennas on cubesats, demonstrating how software tools such as Antenna Magus and CST STUDIO SUITE can be used to address antenna design challenges.October 12, 2017 | 5 pm CETTo the Webinar
This webinar will show how to simulate a gyrotron using a 3D Particle in Cell (PIC) Solver. The focus of the webinar will be a simulation of a gyrotron operating at 2nd harmonic frequency. Topics covered include simulation set up and differences between simulation and measurements.Septemberber 28, 2017 | 5 pm CETTo the Webinar