CST – Computer Simulation Technology

Automotive PCBs: Efficient Signal and Power Integrity Analysis

 

The increasing demand of in-vehicles infotainment systems, along with active safety and electronic multimedia systems, makes simulation of growing importance in the automotive industry. Building a reliable system, shortening the development cycle and reducing the cost are important factors and the use of simulation tools and virtual prototyping are indispensable to achieve these goals. This webinar presents efficient workflows for signal integrity (SI) and power integrity analysis (PI): the pre-layout is addressed using CST DESIGN STUDIO, and for post layout (both SI and PI) analysis, CST PCB STUDIO® will be employed. Several test models are discussed and guidelines on how to improve existing designs and how to build an optimized system are presented.

Rate this Video

    Related Videos

  • EMC Simulation of Consumer Electronic Devices

    All consumer electronic devices need to meet EMC standards. By including EMC compliant design at an early stage, additional costly iterations can be avoided later on down the line. In this webinar we will present how board-level EMC design can significantly...

  • Electromagnetic Simulation in Radar System Design

    This webcast will discuss the application of CST STUDIO Suite to a full radar system design. CST’s complete simulation technology enables the most appropriate method/solver to be applied to the diverse range of components typically found in a radar system....

  • Getting Ahead with CST PCB STUDIO 2014

    CST® PCB STUDIO® is more than just a simulation tool for signal lines and power planes. It comes equipped with the capabilities to manage the complexity of designing modern printed circuit boards, which often contain several different systems with both...

  • 3D EM Modeling of a DDR4 Memory Channel

    Designing channels for the DDR4 memory architecture is a challenging task due to the wide-band single-ended interface reaching data rates of 3.2GB/s (soon to be extended to 4.266GB/s) per copper lane at a low-voltage of 1.2V. The spectral content can...

  • PCB and Package Co-Design and Co-Optimization

    The drive for higher performance leads to increasing complexity and miniaturization of electronic circuit on-chip, more functionality on package level and high density PCB boards. PCB/Package designers are therefore taking the electrical environment via...

contact support

Your session has expired. Redirecting you to the login page...