Multi-Domain Simulation of an Electromechanical Device
This article is concerned with the modeling of an electromechanical component using an equivalent circuit generated from magnetostatic simulations in CST EM STUDIO®. CST DESIGN STUDIO™ is then used to simulate the coupled electric circuit and mechanical...
CST EM STUDIO and SIMULINK for the Dynamic Simulation of a two-state linear Actuator for an Automated Gear Box
This article shows a common approach to the simulation of electromechanical problems. A set of 3D electromagnetic field simulations using CST EM STUDIO® (CST EMS) are carried out on a linear actuator in order to obtain its electromagnetic characteristics...
Non-Linear Simulation of a Photonic Amplifier
This article demonstrates the modeling of a third-order non-linear silicon-on-insulator waveguide at optical frequencies, using time-domain simulation in CST MICROWAVE STUDIO®. The non-linearity gives rise to degenerate four-wave mixing, allowing the...
CST MICROWAVE STUDIO Simulation of a SAM Phantom Head Model with Mobile Phone
This example demonstrates the ability of simulating for SAR in biological tissues such as a human head model (SAM). Arbitrary structures such as mobile phones may be defined using the powerful user interface in CST MWS or its wide-ranging CAD import facilities.
CST MICROWAVE STUDIO Simulation of an RF MEMS Varactor
RF MEMS variable capacitor was constructed and simulated in CST MICROWAVE STUDIO® (CST MWS). The results correlate well with measurements.