CST – Computer Simulation Technology

Electromagnetic Environmental Effects (E3) Simulation

This presentation focuses on the simulation of Electromagnetic Environmental Effects (E3) including lightning strikes, high-power electromagnetic pulses (EMP) and high intensity radiated fields (HIRF). Simulation is playing an increasingly important role in evaluating system performance when subjected to E3 and investigating strategies for protection. Recent developments in CST STUDIO SUITE® offer improvements in simulation efficiency and extension of capability to a wider range of E3 problems. This webinar will present a new approach in CST STUDIO SUITE for modeling radiated susceptibility using a virtual reverberation chamber model.

Rate this Video

    Related Videos

  • Getting Ahead with Compact Models 2018

    Discover how to use Compact Models in the Transmission-Line Matrix (TLM) solver to speed up the electromagnetic simulation of models with small features like slots, seams and vents while maintaining the accuracy of the result, a capability particularly...

  • RF Co-Site Interference Simulation in Complex Electromagnetic Environments

    In this webinar, we will demonstrate how a 3D full-wave simulation can be used to analyze the antenna to antenna coupling for an Unmanned Aircraft System (UAS). The coupling data will then be used to estimate possible RF interference using the CST STUDIO...

  • Simulation of EMI in Hybrid Cabling for Combining Power and Control Signaling

    An increasing trend in the industry is to combine power and control cables into a single hybrid cable design, reducing the complexity of the system and cost. However, without careful design, high voltage power switching transients may lead to unwanted...

  • Electromagnetic Simulation of Composite Materials and Cable Harnesses in Aircraft

    This webinar will discuss efficient EM modeling techniques for simulating composite materials such as carbon fiber laminates at the full aircraft level. The impact of composite materials on electromagnetic effects including installed antenna performance...

  • CST Field Source Principle and Combined Methods - Simulation and Measurement

    A brief introduction to the basic equivalent principle in electromagnetic theory - called Field Source, its application in combined EM algorithms, which is widely used in antenna and EMC RE simulations. Introduce an FS tool by MVG which converts measurement...

contact support

Your session has expired. Redirecting you to the login page...