CST – Computer Simulation Technology

EMC Simulation in the Design Flow of Modern Electronics

 

In the design process of modern electronics, every product development starts with a schematic and ends with the physical implementation of the device, typically done in copper. Along the way to converting the schematic into a real existing layout however, the designer can fall into numerous possible pitfalls in terms of the EMC performance.

In this eSeminar we will show several examples of EMC countermeasures in modern electronics and good practices for implementing them, as well as highlighting some common mistakes. We will also demonstrate how simulation can predict the EMC performance of typical components like PCBs, enclosures and cables, and compare the simulation results to measurements performed on physical implementations of the structures.

    Related Videos

  • Designing Building Structures for Protection against EMP and Lightning

    We will explore the application of CST STUDIO SUITE® to the simulation of EMP and lightning effects. Simulation will be used to analyze the shielding effectiveness of a building structure, visualize the induced current return paths after a lightning strike...

  • New Simulation Workflows for Predicting Radiated Emissions from Electronics Systems

    In this eSeminar, powerful new workflows for reliably predicting radiated emissions from electronics systems will be discussed. We start by importing a complex PCB model into CST PCB STUDIO® and applying new EMC rules, checking algorithms to rapidly identify...

  • True Signal / Power Integrity Co-Extraction and Simulation

    We present a rigorous approach to signal/power integrity modeling using a single model for the channel that includes both signal nets and power delivery network, allowing SI/PI co-simulation with unprecedented accuracy. 3D EM simulation and model extraction...

  • Simplifying the Workflow: Benefits of the CST and Cadence Partnership

    Cadence and CST® offer very effective solutions for high speed PCB/package co-design. Two different workflows will be presented: the "EDA centric" approach that allows the full wave simulation to be run as a background process, and the “EM centric approach”...

  • Precise Characterization of Multipin Connectors

    This eSeminar will present a technique for the extraction of the connector model from measured S-parameters mitigating the effects of the test-fixture using CST STUDIO SUITE®. The concept will be demonstrated using the example of a connector for automotive...

contact support

Your session has expired. Redirecting you to the login page...