FilterDesigner 2D is a fully-integrated tool for the design and synthesis of planar and circuit filters in CST®STUDIO SUITE®. Built on Nuhertz Technologies’ well-reputed and mature technology, FilterDesigner 2D can be used to quickly select an appropriate filter type and generate a simulation-ready circuit or 3D model.
The ERNI Ermet zeroXT connector is able to transmit differential signals up to a data rate of 10Gbit/s [of a non-return zero code]. The complete design support, including the electromagnetic field analysis, the impedance calculation and the crosstalk...
Broadband Characterization of Launchers
Characterizing material properties with a high degree of precision requires very accurate
sensors, which means that the properties of the sensor itself must also be accurately
characterized. Simulation allows the properties of elements of the test equipment...
USB 3.1 Type-C Simulation and Compliance Test
USB 3.1 Type-C Connector Simulation and SI compliance tool.
With the continued adoption of USB interface, there is a need to adapt the USB technology with the newer devices as they become smaller, thinner, lighter and faster. Several types of USB connector...
Signal Integrity of Cadence Allegro Backplane Trace Import
A portion of a backplane, designed with the Cadence Allegro® layout tool, is imported into CST MICROWAVE STUDIO®. This section consists of a differential pair with vias which go through the board. The structure was analyzed in Microwave Studio. The...
Signal Integrity of High Speed Flip Chip Package
This article describes how CST MICROWAVE STUDIO® is used to analyze the signal integrity of a flip chip package. The study is to determine the effect of ground planes on insertion loss of the package signals.