CST – Computer Simulation Technology

Getting Ahead with Particle Source Simulation

This eSeminar will illustrate the electromagnetic simulation of four different particles sources in CST STUDIO SUITE® 2018: a Pierce-type electron gun, a field emission source, an ion source and a magnetron cathode. It will guide you through the use of different emission models as well as the simulation of the emission in a conformal hexahedral or tetrahedral mesh. In addition, the superposition of external fields will be shown and the setup of an electron source will be demonstrated.

Rate this Video

    Related Videos

  • Gyrotron Simulation

    A gyrotron is typically challenging to simulate in 3D, as they often are electrically large. High-performance computing using one or multiple graphics processing Units (GPU) can accelerate simulations significantly and make the 3D Particle in Cell (PIC)...

  • Traveling Wave Tube Design with Simulation

    The development of electron devices or vacuum tubes has advanced a lot over the last century. The principle behind a traveling wave tube (TWT) is the interaction between an electron beam and an electromagnetic wave in a slow wave structure (SWS), by which...

  • Simulation of Accelerator Components

    A particle accelerator is a very sophisticated machine which combines many different components, including cavities, magnets, beam position monitors among others. Multiple competing design goals play a role in the design of these components. The particle...

  • Accurate Simulations of Multistage Axial VIRCATORS Operating in S-Band Using CST PARTICLE STUDIO

    Classical axial VIRCATORS have low power conversion efficiency, typically less than 1% depending on the different designs proposed in the literature. The goal of this webinar is to propose new VIRCATOR structures with reflectors embedded in the output...

  • Multiphysics Approach for a Magnetron and Microwave Oven Design

    This webinar will show how the CST® STUDIO SUITE® Complete Technology approach can be used to aid the full design path of a device. Various physical aspects are important during a development cycle and EM simulation is only one part of it.

contact support

Your session has expired. Redirecting you to the login page...