CST – Computer Simulation Technology

RF Co-Site Interference Simulation in Complex Electromagnetic Environments

 

The world today is filled with radio frequency systems, sensors and wireless devices which make our lives easier, improve our communication with one another and ensure our safety and well-being. Preventing degradation or complete loss in the performance of these systems due to interference from other nearby systems is a well-known challenge. In recent years, it has received more and more attention as the challenge has increased due to the explosion of wireless systems we’ve come to rely on.

For military and defense, the challenge of co-site interference is crucial to address due to the increase in RF operational capabilities needed to perform a mission. Land vehicles, ships and aircrafts are extremely complex electromagnetic environments, with large numbers of electronic controls, antennas and sensors installed onboard. In aerospace, a reduced portion of the platform may be available for the antenna installation and placement due to mechanical and aerodynamic constraints, making the likelihood of an interference problem very high. ...

In this webinar, we will demonstrate how a 3D full-wave simulation can be used to analyze the antenna to antenna coupling for an Unmanned Aircraft System (UAS). The coupling data will then be used to estimate possible RF interference using one of the newer products of CST STUDIO SUITE: The CST Interference Task. With this new system-level tool, RF systems can be defined to analyze inter-system coupling. The analysis delivers the possible occurrence of RF interference at a glance. The interference task is fully integrated into the CST design environment, making it easy to run different scenarios and test mitigation strategies after the detection of possible interference.

Rate this Video

    Related Videos

  • Electromagnetic Simulation in Radar System Design

    This webcast will discuss the application of CST STUDIO Suite to a full radar system design. CST’s complete simulation technology enables the most appropriate method/solver to be applied to the diverse range of components typically found in a radar system....

  • Advanced RCS Analysis of Airborne Vehicles

    Analysis by electromagnetic simulation allows the designer to characterise the RCS of a target far more extensively than would be possible for similar cost and time expenditure by measurement. CST STUDIO SUITE® provides extensive functionality to analyse...

  • Electromagnetic Environmental Effects (E3) Simulation

    Simulation is playing an increasingly important role in evaluating system performance when subjected to E3 and investigating strategies for protection. This webinar will present a new approach in CST STUDIO SUITE for modeling radiated susceptibility using...

  • Getting Ahead with Compact Models 2018

    Discover how to use Compact Models in the Transmission-Line Matrix (TLM) solver to speed up the electromagnetic simulation of models with small features like slots, seams and vents while maintaining the accuracy of the result, a capability particularly...

  • Automotive Radar Simulation

    In this webinar, we will show how CST STUDIO SUITE can be used to perform and analyze all of the design stages of automotive radars, starting from the antenna, through its integration inside a radome, to placing and calibrating the whole package inside...

contact support

Your session has expired. Redirecting you to the login page...