CST – Computer Simulation Technology

Simulation for EMC Performance in Modern Electronics

 

The design flow for a modern complex electronic device involves many stages, and the earlier potential EMC problems in the design are detected, the easier and cheaper it can be to mitigate them. In this webinar we will focus on two topics: shielding effectiveness of enclosures and routing of differential lines. Even though the topics sound unrelated, they can be efficiently simulated with the same methods.

This webinar uses a realistic demonstrator PCB and enclosure, which were first shown in our webinar from November 2013, “EMC Simulation in the Design Flow of Modern Electronics” – however, this webinar explores different topics and can be watched as a standalone.

Rate this Video

    Related Videos

  • EMC Simulation of Consumer Electronic Devices

    All consumer electronic devices need to meet EMC standards. By including EMC compliant design at an early stage, additional costly iterations can be avoided later on down the line. In this webinar we will present how board-level EMC design can significantly...

  • 3D EM Modeling of a DDR4 Memory Channel

    Designing channels for the DDR4 memory architecture is a challenging task due to the wide-band single-ended interface reaching data rates of 3.2GB/s (soon to be extended to 4.266GB/s) per copper lane at a low-voltage of 1.2V. The spectral content can...

  • Power Delivery Network (PDN) Analysis

    This webinar consists of two parts. The first part will highlight the role of simulation in the design of PCB power delivery network (PDN) systems, including the voltage regulator module (VRM), decoupling capacitors (decap), and the spreading parasitic...

  • Design and Characterization of SerDes Channels

    This webinar will highlight the key features for SerDes Channel Design in CST STUDIO SUITE including the new eye diagram tool, demonstrating realistic transmitter and receiver models including jitter, modulation and equalization at both the pre-layout...

  • Getting Ahead with Broadband Macromodeling 2017

    The complexity of modern high-end electronic systems as well as strict time-to-market constraints require fast and reliable Signal/Power Integrity and Electromagnetic Compatibility performance assessments from very preliminary stages of the design onwards....

contact support

Your session has expired. Redirecting you to the login page...