CST – Computer Simulation Technology

Simulation of EMI in Hybrid Cabling for Combining Power and Control Signaling

 

An increasing trend in the industry is to combine power and control cables into a single hybrid cable design, reducing the complexity of the system and cost. However, without careful design, high voltage power switching transients may lead to unwanted electromagnetic interference. Typical hybrid cable design parameters may include the separation between conductors, twist rate of twisted pairs, shielding and screen types.

This webcast will explore the simulation of hybrid cable design using CST CABLE STUDIO and the prediction of EMI levels. Topics covered will include the modeling of shield transfer impedance, crosstalk and induced common mode currents.

Rate this Video

    Related Videos

  • Electromagnetic Simulation in Radar System Design

    This webcast will discuss the application of CST STUDIO Suite to a full radar system design. CST’s complete simulation technology enables the most appropriate method/solver to be applied to the diverse range of components typically found in a radar system....

  • EMC/E3 Analysis of Rotorcraft Electrical System Exposed to Antenna Radiation and Incident EMP

    This webcast discusses the application of full wave modeling to predicting EMC/E3 performance in a rotorcraft. We start by investigating the coupling from a blade installed on the fuselage to internal cable systems. CST CABLE STUDIO is used to efficiently...

  • Electromagnetic Simulation of Composite Materials and Cable Harnesses in Aircraft

    This webinar will discuss efficient EM modeling techniques for simulating composite materials such as carbon fiber laminates at the full aircraft level. The impact of composite materials on electromagnetic effects including installed antenna performance...

  • EMC Simulation of Automotive Ethernet

    This webinar will present simulations of EMC related aspects of the automotive ethernet: the effect of the PCB layout on the emission from an automotive ethernet channel, crosstalk from the automotive ethernet channel to other cables inside one harness,...

  • Designing Building Structures for Protection against EMP and Lightning

    EMP is a high-intensity burst of electromagnetic energy that can potentially cause major disruption to vital infrastructure such as telecommunications, electrical power, banking and finance, emergency services, medical facilities, transportation, food...

contact support

Your session has expired. Redirecting you to the login page...